Drop No. 001 · On sale
Step end cap
Fits 2009–2015 Honda Pilot running boards. Fits the left front (shown). Right front, left rear and right rear made to order.
made by Cohjoy Prints
Custom 3D printing · Athens, GA
Make my idea real.
It's on the bench.
A real person answers the same business day with a sketch, a price or a question.
CJm · Cohjoy Measured
Measure a part with one photo
For a part that broke or one you can't find anymore. Our sheet gives us real millimeters, and a person measures it the same business day. It works best for flat or low parts; for a tall one we may ask you for one more measurement.
- Print the sheet at 100% (Actual size). Open the CJm sheet (PDF)
- Set the sheet on a table and lay the part on the dots. Put a quarter on its ring if you have one. No card, no ID, nothing personal.
- Snap one photo straight down with the whole page in view. The paper's edges tell us the true size.
Drop No.
Daıly Prınt
Athens, Georgia
Live from the Build Plate
Drop No. Made to order
Daıly Prınt
Athens, Georgia
The drop deskNo. 001 on sale
Daıly Prınt
Our own pieces, one numbered run at a timeAthens, Georgia
$50Made to order
Between issuesNext issue coming
Daıly Prınt
Printed and Certified by Cohjoy PrintsAthens, Georgia
Waiting for the next issue.
Every issue is a numbered run, printed live on this plate and announced here first. When it sells out, it's retired for good.
Drop No. Coming soon
Daıly Prınt
Athens, Georgia
Live from the Build Plate
The storyNo.
Every dropThe Daily Print
Daily Print · 001Step end capFits 2009–2015 Honda Pilot running boards. Fits the left front (shown). Right front, left rear and right rear made to order.$50On sale
The factsAs planned
- Size
- Edition
- Material
- Layers
- Made to order
- Design
The drop desk
Drop No. Made to order
Daıly Prınt
Athens, Georgia
each
How many
Checkout is not open on the site right now. Leave your email and a Square link for it comes by email the same business day.
The storyNo.
The picturesPhotos to follow
The factsAs printed
- Fits
- Material
- Layers
- Made to order
- Printed after you order
- Design
How The Daily Print worksNo. 001 onward
- Every drop has a number.No. 001, then 002, then 003. A number is never used twice.
- New drops are announced here first.Each one shows up on this page before anywhere else.
- This one is a Cohjoy original.We designed it ourselves, and it is made to order: yours is printed after you order it.
- Printed in Athens, Georgia.On our own printer, and checked by hand before it ships.
How it worksNext issue coming
Daıly Prınt
Printed and Certified by Cohjoy PrintsAthens, Georgia
One numbered run at a time.
Each Daily Print is a single design, printed in a small numbered run. When the run sells out, that number is retired and never printed again. Then the next number arrives.
The rulesNo. 001 onward
- Every drop has a number.No. 001, then 002, then 003. A number is never used twice.
- The run size is set per piece.A hard print might be a handful, an easy one more. Each drop shows its run and how many are left.
- Sold out means retired.There is no deadline. A run ends when its last piece sells, and that design is never printed again.
- New drops are announced here first.A new one comes whether or not the last one sold out.
- Printed and Certified by Cohjoy Prints.Printed on our fine Cohjoy DNA tune at 0.12 mm layers, the first one inspected and photographed, every piece checked by hand and numbered.
How it will lookIllustration · sample run of 12 · not a real drop
Live
Seven left.
A live drop shows its run and how many are left. The ring closes one piece each time one sells.
The next issue, as of nowNothing here is guessed
PriceSet at the drop
Run sizeSet for the piece, shown at the drop
Drop dayAnnounced here first
Be there for the next issue.
Printed and Certified by Cohjoy Prints. The seal means every step happened: our own print tune, the file audited, the first one inspected and photographed, every piece checked by hand and numbered.
2
![]()
Its maze, floor by floor
One of the 8.19 trillion possible mazes.Every cube grows from its own seed. When it sells, that seed is retired.
Seed
One of one
- rooms
- 27
- tilts, best
- colour
tunls · one of onetunl 2Blue · best 15 tilts$20On sale
tunls · one of onetunl 890,323Black · best 14 tilts$20On sale
WARNING: CHOKING HAZARD. This toy is a marble. Not for children under 3 yrs. Ages 14 and up.
shipped, US
One of one
Next cube on the bench.This seed has a home. It is retired and will never be grown again. Leave your email and we'll tell you when the next one is ready.
One email when it is ready. Nothing else.
The tunls lab
tunls
Every seed is one of one.
A 60 mm cube with a maze hidden inside and a 10 mm steel marble. You tilt it, listen to the marble, and find the way out. Every cube grows from its own seed, and that seed is never handed out again. Made by a dad of two in Athens, Georgia.
One of one
tunl no.
- Cube
- 60 mm ·
- Marble
- 10 mm steel, in the box
- Best
- tilts
- Rooms
- 27, on a 3 × 3 × 3 grid
- Shipping
- included, US
WARNING: CHOKING HAZARD. This toy is a marble. Not for children under 3 yrs. Ages 14 and up.
shipped, US
This seed has a home. It is retired and will never be grown again.
Card checkout is resting right now. Leave your email and we'll send a Square link for this cube the same business day.
Its maze, floor by floor
Three floors of nine rooms.
The red is the air: the tunnels the marble rolls through, sliced through the middle of each floor of this cube's own model. Where a tunnel turns up or down, a round hole marks the shaft to the next floor. No two seeds draw the same three floors.
The seed's glyph
reading the drawing
There are exactly 8,193,540,096,000 ways to join 27 rooms into one maze: 8.19 trillion possible mazes. Every cube grows from its own seed, and each seed is sold once, then retired.
The glyph is the seed's signature, written as a maze. It is not a map of the maze inside your cube; that stays hidden until you find it.
- A tunnel between two rooms on the same floor.
- A shaft from this room up to the floor above.
- Start here, then read floor by floor.
Try a seed
How it plays
- 01Drop the marble in.One bore hole, one 10 mm steel marble.
- 02Tilt.No screen, no batteries. The cube is the whole game.
- 03Listen for the way out.The marble rolls and clicks. Slowly the maze draws itself in your head. The fewest tilts it can be done in is its best.
tunls
Certificate of seed ·
Best tilts · 27 roomsRetired once sold.
Cohjoy Prints Certified
Every cube is Certified. It is sliced with our own locked print tunes, the first one off the plate is inspected and photographed, and each cube is checked by hand and numbered before it leaves Athens.
Want the next one?
We'll email you when the next cube is on the shelf.
01
![]()
Plate 01 · Augusta · Georgia
PIMENTO PINES
1:17,000Lidar 2018-19 · OpenStreetMap · Public scorecards
BLOCKS · numbered edition of 18PIMENTO PINESAugusta · Georgia$20On sale
BLOCKS · numbered edition of 10HEDGES, ONE FOOTYEAR ONE No. 1 · Athens, 1929$20On sale
BLOCKS · numbered edition of 10FRANKSGIVINGYEAR ONE No. 2 · Auburn, 1939$20On sale
$20
Numbered edition of 18
The BLOCKS store
![]()
Photo of the real print
Line 03 · On sale
Real places, small enough to hold.
Each BLOCK is a real place, built from lidar and map data, with a name of its own. The first one is off the printer. Pick it, or tell us yours.
Send us an address or a place you love.
Choose a BLOCK
Numbered edition
Your receipt from Square is in your email. We email you the same business day with the date it ships.
Every BLOCK is Cohjoy Prints Certified: sliced with our own tunes, the first one inspected, every piece checked by hand before it ships.
Every picture here is a photo of the real print. Built from lidar and map data; the hills and trees are drawn a little taller so you can see them.
How a BLOCK is made
, from the survey to your shelf
- 01The survey
Its own ground, sliced flat, drawn above: the lines are the model's, not a pattern. - 02The modelHills and trees drawn a little taller so you can see them; every street and green where it is.
- 03The print
- 04NumberedThe proof, row by row
A little hello for someone.
The fall + Halloween collection · 7 designsskins
The skins store
Seven designs. Three ways to wear one.
Small multicolour prints you wear and use every day: on a badge reel, on the fridge, on your keys. Each one printed in Athens, in up to four colours, at 0.12 mm layers. Every picture here is drawn from the exact file the printer prints.
Wear it as
Size
Three sizes, honest about it.
Single colour and Standard are 38 mm across, Skins+ is 45 mm. Single colour is the design in one filament; Standard and Skins+ carry every colour it was drawn in.
Your photo, your team's logo.
A skin can be made from a photo or a logo. Draw or describe it on the Napkin and a person answers the same business day.
Made in Athens, Georgia.
Every skin is printed, checked by hand and Certified by Cohjoy Prints before it ships.
Cohjoy Store · one ticket
The Counter
Everything for sale on the site, on one rail. Tap a tag to put it on your ticket, then check out once.
Nothing is on the counter right now. Every piece has a home.
Ticket · 0 pieces
The Counter
Cohjoy Store · one ticket, one checkout
The Counter
Every piece for sale on the site, hanging on one rail. Put what you want on the ticket, set how many, and pay once for all of it.
Job ticketCohjoy Store
Sales tax, if any, is added at checkout, which prices the ticket again before you pay. Shipped in the US.
Thank you
Cohjoy Prints · Athens, Georgia
Everything starts as a sketch.
The shop
We design and 3D print things in Athens: our own lines, and anything you can draw on a napkin. Every piece is checked by hand before it ships.
The fine print
© 2026 Cohjoy Prints, Athens, GA. BLOCKS map data © OpenStreetMap contributors